Power Supply S-120-12 sediakan arus listrik 0 s/d 12Volt dan kuat arus (AMPERE) 0 s/d 10A. Cocok sebagai alat service, perbaikan alat elektronik yg mempunyai keluaran arus listrik 12v sampai 10a. Model | S-120-5 | S-120-7.5 | S-120-12 | S-120-15 | S-120-24 | S-120-48 | Output | DC Voltage | 5V | 7.5V | 12V | 15V | 24V | 48V | Rated Current | 24A | 16A | 10A | 8A | 5A | 2.5A | Current Range | 0~24A | 0~16 | 0~10A | 0~8A | 0~5A | 0~2.5A | Rated Power | 120W | 120W | 120W | 120W | 120W | 120W | Ripple & Noise (max.) Note.2 | 100mVp-p | 125mVp-p | 125mVp-p | 125mVp-p | 150mVp-p | 150mVp-p | Voltage Adj. Range | 4.5~5.5V | 6.75~8.25V | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V | 43.2~52.8V | Voltage Tolerance Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | Load Regulation | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | Setup,Rise time | 1000ms, 30ms at full load | Hold time (Typ.) | 20ms at full load | Input | Voltage Range | 88 ~ 132VAC/176 ~ 264VAC selected by jumper or switch 248 ~ 370VDC | Frequency Range | 47~63HZ | Efficiency(Typ.) | 76% | 78% | 80% | 81% | 83% | 84% | AC Current(Typ.) | 3.15A/115VAC 1.5A/230VAC | Inrush Current (Typ.) | COLD START 20A/115VAC 40A/230VAC | Leakage Current | <1mA / 240VAC | Protection | Over Load | 105 ~ 150% rated output power | Protection type : Hiccup mode, recovers automatically after fault condition is removed | Over Voltage | 5.75 ~ 6.75V | 8.63~10.13V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | 55.2~64.8 | Protection type : Hiccup mode, recovers automatically after fault condition is removed | Environment | Working Temperature | -10 ~ +60°c (Refer to "Derating Curve" ) | Working Humidity | 20~90% RH Non-condensing | Storage temp.& humidity | -20~+85°C, 10~95%RH | Temp. coefficient | ±0.03%/°C (0~50°C) | Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | Safety & EMC (Note 4.) | Safety Standards | UL1012, UL60950-1, TUV EN60950-1, CCC GB4943 approved | Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/ 25°c / 70% RH | EMC Emission | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 | EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A | Others | MTBF | 314.9K hrs min. MIL-HDBK-217F (25 °c) | Dimension | 199*98*38mm (L*W*H) | Packing | 0.65Kg; 20pcs/14.2Kg/0.8CUFT | Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |  
|